Dakota Digital 650360 Manual de usuario descargar pdf

MAN #650360

Operating Manual for

Clock / Auxiliary Displays for VHX systems

The VHX auxiliary display module is designed to work with a Dakota Digital VHX system and will not function properly

on its own. With this module, an additional display area is added to your current system to provide more functionality.

This module can be used as a simple clock display or it can display data from any BIM module attached to the system

as well as several gauge values from the control box sensors.

Most versions of this module come with at least one switch in the face to allow the display to change between various

screens. Some versions may also contain two additional switches in the face which can be used as the SW1 and SW2

for the VHX control box with the use of the switch harness provided with it.

CONNECTION:

The auxiliary display has a connector on the rear that will accept a normal CAT 5, CAT 5E, or CAT 6 patch cable.

This can be used to connect the module to any available port on the VHX control box (same locations the main

VHX gauges plug into).

ACC. POWER

CONST. POWER

GROUND

TACH

WARN

SPD +

SPD SND

SPD -

SPD OUT

SW2 (-)

SW1 (-)

ADJ SND

ADJ -

WTR SND

WTR -

OIL +

OIL SND

OIL -

FUEL +

FUEL SND

FUEL -

WAIT (+)

CRUISE (-)

GEAR (1 WIRE)

4x4 (-)

RIGHT (+)

LEFT (+)

HIGH (+)

BRAKE (-)

CHECK ENG (-)

VHX

CONTROL BOX

CABLE AUX.

I/O

DISPLAY

www.dakotadigital.com

[email protected]

605-332-6513

DIM (+)

ORANGE

GREEN

Used for displays

with 3 switches

Connection for all

auxiliary displays

Use any open jack

Auxiliary Display module

VHX

control

box

SWITCH HARNESS:

Some auxiliary modules will come with the

pictured switch harness to allow additional

switches in the clock face to function as switch

1 and 2 for the main VHX system.

Auxiliary modules with 3 switches on front:

Connect the orange wire to SW1(-) terminal on VHX control box. Right switch will be SW1 (speed display).

Connect the green wire to SW2(-) terminal on VHX control box. Left switch will be SW2 (tach display).

Leave blue wire unconnected. Center switch will be SW3 (clock display)

Auxiliary modules with no switches on front:

If the module has no switches, connect an external switch from the blue wire of the harness to ground to allow

switch operations for the clock display. The orange and green wires would be left unconnected in this case.

ORANGE (switch 1)

GREEN (switch 2)

BLUE (switch 3)

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - SWITCH HARNESS:

1 MAN #650360 Operating Manual for Clock / Auxiliary Displays for VHX systems The VHX auxiliary display module is designed to work with a Dakot

Pagina 2 - UPDATE SPD:

2 MAN #650360 SETUP: To enter setup, press and hold the switch (for systems with 3 switches, hold the center switch) while turning on the key. The d

Pagina 3 - NORMAL OPERATION:

3 MAN #650360 TEMP UNIT: This setting determines which temperature unit is used when displaying temperatures. This unit setting will be independent

Pagina 4

4 MAN #650360 AVAILABLE SCREENS: Some screen data should always be available to this module from most VHX systems. These screens are: Clock E

Pagina 5 - Troubleshooting guide

5 MAN #650360 USING CLOCK OFFSET: Because this auxiliary module displays the clock, it may be desired to disable the display of the clock on the mai

Pagina 6 - SERVICE AND REPAIR

6 MAN #650360 SERVICE AND REPAIR DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is avai

Comentarios a estos manuales

Sin comentarios

Dakota Digital 650360 Manual de usuario

Busca en linea o descarga Manual de usuario para Motor accesorios y componentes de vehículos Dakota Digital 650360. Dakota Digital 650360 User's Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Motor accesorios y componentes de vehículos Dakota Digital 650360