Dakota Digital MCL-36K-SPD Manual de usuario descargar pdf

MAN#650333:A

MCL-36K-SPD

Thank you for purchasing the Dakota Digital MCL-36K-SPD gauge for your Harley Davidson Touring bike. This kit is

designed to be a direct, plug in replacement for all touring models from 2004 – 2011. This is part of a six gauge

package for touring models so you can add additional gauges as you choose.

INSTALLATION

First read and familiarize yourself with all of the components and this manual. The first step is to remove the

seat and disconnect the negative side of the battery, as with any electronic install. Once the battery is disconnected you

are ready to start.

Remove the outer fairing; this will vary from model to model, so please follow the service manual to expose the

wiring and gauges. Don’t be alarmed by the amount of wires behind the fairing, this is a direct plug in gauge and these

detailed instructions will guide you through it.

Street Glide with outer fairing removed Road Glide with outer fairing removed

REMOVAL OF FACTORY GAUGE

ULTRA FLHT & FLHX (STREET GLIDE batwing fairings)

Unplug the speedometer. Remove the screws securing the clamp that holds the gauge in place and pull it out through

the front of the fairing. Save the screws, gasket, and clamp to be reused when you install the new Dakota Digital gauge.

Unplug the factory speedometer Unscrew the clamp and remove gauge

IMPORTANT NOTE!

This gauge has an odometer preset option that is only available for the first

100 miles (160km) of operation. See ‘‘preset odometer’’ for instructions.

1 2 3 4 5 6

1 MAN#650333:A MCL-36K-SPD Thank you for purchasing the Dakota Digital MCL-36K-SPD gauge for your Harley Davidson Touring bike. This kit is desi

2 MAN#650333:A FLTR (ROAD GLIDE) You will need to remove the speedometer and tachometer instrument bezel. To do this, remove two small screws on

3 MAN#650333:A FUNCTION SWITCH The factory speedometer push button switch is used as the main function switch. The function switch allows access t

4 MAN#650333:A SPEEDOMETER SETUP Main Menu Sub Menu Description SPd dIAG Read diagnostic codes from engine or security module

5 MAN#650333:A (Speedometer Setup Continued) PerFPerFPerFPerF Performance Menu setup The performance readings can be turned on or off. When

6 MAN#650333:A Speedometer Troubleshooting guide. Problem Possible cause Solution Gauge will not light up Orange wire doe

Sin comentarios

Dakota Digital MCL-36K-SPD Manual de usuario